Glass Walls Stand to Honor Disabled Veterans of U.S.

Glass Walls Stand to Honor Disabled Veterans of U.S.

Glass Walls Stand to Honor Disabled Veterans of U.S.

Fourteen years after being signed into law, the American Veterans Disabled for Life Memorial was dedicated in October of this year. The completed memorial, located in Washington, D.C., stands as the first such tribute in the nation to specifically honor veterans who were injured in military conflicts throughout the United States’ history.

The memorial features three “interpretative walls” at the site, made up of 48 laminated glass panels that display soldiers’ stories through photographs and quotations. The images and text are etched within the panels, which are each made up of five 360-pound lites laminated together. Some of the etching appears on the outside surface, though most is on the interior.

Veteran-owned, Seattle-based Hartung Glass Industries provided the 3/4-inch-thick PPG Starphire glass, which was etched by Oregon-based Moon Shadow Glass via a manual sandblasting process. Moon Shadow had to produce detailed stencils and film from the original artwork prior to the sandblasting.

memorial wallTim Frasier of Moon Shadow says each lite of glass had a four-day turnaround, which included “hours of prepping, curing time, and hours of manually sandblasting to control the quality.” Then, the glass was cleaned and sent to Oregon-based Savoy Studios, where certain text and images were paint-filled.

Oregon-based Glass Strategies later laminated the lites together using Glasslam’s Polylam. Rich Lamothe of Glass Strategies said they would do one panel a day and that “each panel was laminated on a special table made just for the project.”

Once that process was complete, Savoy trimmed each panel to its finished size via waterjetting, and the edges were rounded and polished to 200 grit. According to Dan Legree of Savoy, the waterjetting took a day, and another two to three days were spent on the grinding and polishing edgework. The top of the walls were slightly domed for things like water runoff and bird droppings.

“A lot of thought went into it,” says Legree.

The completed, laminated panels came in at approximately 1,800 pounds apiece, and they were sent back to the Capital Region for installation, which was done by Tidewater Glazing Inc. Michael Vergason was the memorial’s lead designer and architect, and the glass engineer was Eckersley O’Callaghan.

This entry was posted in Kars 4 Vets and tagged , , , , , , , , , , , . Bookmark the permalink.

Leave a Reply